Mining skycoin maksimal 8 node setiap akunnya dan agar STB dapat menggunakan MAC Address yang berbeda, harus mengganti MAC Address STB secara permanen dengan cara :
1. Masuk sebagai user root
2. Ketik perintah berikut :
nano /etc/network/interfaces
3. Ubah dan masukan kode pada yang di tandai warna merah silakan diganti dengan MAC Address yang ada di belakang STB
# Wired adapter #1
allow-hotplug eth0
no-auto-down eth0
iface eth0 inet dhcp
#address 192.168.0.100
#netmask 255.255.255.0
#gateway 192.168.0.1
#dns-nameservers 8.8.8.8 8.8.4.4
# hwaddress ether # if you want to set MAC manually
hwaddress ether 00:00:00:00:00:00
# pre-up /sbin/ifconfig eth0 mtu 3838 # setting MTU for DHCP, static just$
# Wireless adapter #1
# Armbian ships with network-manager installed by default. To save you time
# and hassles consider using 'sudo nmtui' instead of configuring Wi-Fi settings
# manually. The below lines are only meant as an example how configuration could
# be done in an anachronistic way:
#
#allow-hotplug wlan0
#iface wlan0 inet dhcp
#address 192.168.0.100
#netmask 255.255.255.0
#gateway 192.168.0.1
#dns-nameservers 8.8.8.8 8.8.4.4
# wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
# Disable power saving on compatible chipsets (prevents SSH/connection dropouts$
#wireless-mode Managed
#wireless-power off
# Local loopback
auto lo
iface lo inet loopback
4. Simpan hasil perubahan
tekan CTRL X lalu ketik Y tekan Enter
5. Hidupkan ulang STB
reboot
Note : Merubah MAC Address bisa juga dengan cara berikut ini
sudo apt-get install macchanger
ifconfig eth0 down
macchanger wlan -a
macchanger wlan -A
ifconfig eth0 up
dpkg-reconfigure macchanger
0 comments:
Post a Comment